page contents
Wort Chiller - Immersion Chiller (25' x 3/8" With Tubing) – CRAFTR
Browse

Wort Chiller - Immersion Chiller (25' x 3/8" With Tubing)

$ 60.89
Brewmaster Immersion Wort Chillers Wort Chiller - Immersion Chiller (25' x 3/8" With Tubing)

The Fermentap Wort Chiller is unlike any on the market today. The coils have been specially positioned to be at the top of your wort, where the majority of the heat will be. This results in a faster cooling time over chillers with lower coils.

25' of 3/8'' copper tubing. 8' of vinyl tubing attached to both the in and the out with a female garden hose fitting on the in side. Use our CE20 hose thread adaptor to attach to your sink. Perfect for a kitchen environment where the sink is close by. These Wort Chillers are ideal for our 8 Gallon Heavy Duty Kettles!

SPECS

  • SHIPPING
  • TIPS
  • 25 feet of 3/8 inch copper tubing
  • 8 feet of vinyl tubing at both the in and the out
  • Female garden hose fitting is included for easy adaptation to a garden hose.
  • 10" diameter, 8" to the top coil, 15" to the bend to go over the lip of the kettle.

Prevent burns from Wort Chillers!

Connect your "In" and "Out" hoses to your Wort Chiller BEFORE adding the Wort Chiller to your boiling wort. If you place a previously used Wort Chiller into a boiling kettle the water trapped in the copper from the last use will turn to steam and possibly spit out of the chiller. It is also very difficult and dangerous to connect hoses to an already hot wort chiller.

Using Star San to condition your stainless and copper

Stainless steel discolored? Copper looking used, and starting to lose its shine? Take a little raw Star San (not mixed with any water) and apply it to the copper or stainless with a scrub pad (CE27) or a rag, and let it sit for 15 minutes. Rinse it off, and re-apply if necessary (although it usually isn't!) This will help keep your stainless conditioned, and will make your copper look brand new again.

Are Copper Wort Chillers safe to put in boiling wort?

Yes! Did you know there is zinc in copper? Zinc is an essential nutrient source for yeast to consume as they grow and multiply. The heat helps extract small amount of zinc found in copper. It's a win/win for your fermentation and for you as a brewer.

 

$ 69.99 -13%
$ 60.89
$ 69.99 -13%
$ 60.89
The Fermentap Wort Chiller is unlike any on the market today. The coils have been specially positioned to be at…

McAfee Secure

CRAFTR Guarantee

Easy Returns

Free Shipping On Orders Over $39

Tags
SKU wc20
Type Immersion Wort Chillers
Description

The Fermentap Wort Chiller is unlike any on the market today. The coils have been specially positioned to be at the top of your wort, where the majority of the heat will be. This results in a faster cooling time over chillers with lower coils.

25' of 3/8'' copper tubing. 8' of vinyl tubing attached to both the in and the out with a female garden hose fitting on the in side. Use our CE20 hose thread adaptor to attach to your sink. Perfect for a kitchen environment where the sink is close by. These Wort Chillers are ideal for our 8 Gallon Heavy Duty Kettles!

SPECS

  • SHIPPING
  • TIPS
  • 25 feet of 3/8 inch copper tubing
  • 8 feet of vinyl tubing at both the in and the out
  • Female garden hose fitting is included for easy adaptation to a garden hose.
  • 10" diameter, 8" to the top coil, 15" to the bend to go over the lip of the kettle.
Tips

Prevent burns from Wort Chillers!

Connect your "In" and "Out" hoses to your Wort Chiller BEFORE adding the Wort Chiller to your boiling wort. If you place a previously used Wort Chiller into a boiling kettle the water trapped in the copper from the last use will turn to steam and possibly spit out of the chiller. It is also very difficult and dangerous to connect hoses to an already hot wort chiller.

Using Star San to condition your stainless and copper

Stainless steel discolored? Copper looking used, and starting to lose its shine? Take a little raw Star San (not mixed with any water) and apply it to the copper or stainless with a scrub pad (CE27) or a rag, and let it sit for 15 minutes. Rinse it off, and re-apply if necessary (although it usually isn't!) This will help keep your stainless conditioned, and will make your copper look brand new again.

FAQ

Are Copper Wort Chillers safe to put in boiling wort?

Yes! Did you know there is zinc in copper? Zinc is an essential nutrient source for yeast to consume as they grow and multiply. The heat helps extract small amount of zinc found in copper. It's a win/win for your fermentation and for you as a brewer.

 

Returns
Shipping

McAfee Secure

CRAFTR Guarantee

Easy Returns

Free Shipping On Orders Over $39

QUESTIONS & ANSWERS

Have a Question?

Be the first to ask a question about this.

Ask a Question