WilliamsWarn Counter Pressure Bottle Filler

This deluxe counter-pressure bottler allows you to bottle from a WilliamsWarn, BrewKeg™ or any homebrew style keg without losing any carbonation.

The Bottler can accommodate bottles up to approximately 370mm (14 ½ inches) in height and 150mm (5.9 inches) in diameter. This allows a variety of bottle types to be used, including bottle sizes up to 3L (101 fl.oz.) growlers.

Once the two hoses (gas and beverage) are connected via the simple push-lock fittings on top of the valve, you just open the gas side for a few seconds to pressurise the bottle and remove air, close that and then open the beverage side to allow beverage to enter. The beverage fills against a back-pressure and so doesn’t foam and doesn’t lose any carbonation. Pressure release and therefore fill flow rate are controlled by how open the varibable pressure valve is set.

A 500ml bottle (1 US pint) can be filled in 40 seconds and a full WilliamsWarn brewery can be emptied in about 40 minutes (filled into 46 bottles), to then be cleaned ready for the next brew.

Features:

• Fits bottles up to 14.5 in. tall and 5.9 in. wide
• Simple push-lock fittings
• Bottle fills against a back pressure so no carbonation is lost
• Fills a 500 ml bottle in 40 seconds or 46 bottles in about 40 minutes
• Bottles stay carbonating and are ready to drink right away