page contents Water Efficient Immersion Wort Chiller (25' x 3/8" With Tubing) – CRAFTR
**FREE SHIPPING ON ORDERS OVER $49.00**
Browse
Browse

Water Efficient Immersion Wort Chiller (25' x 3/8" With Tubing)

$ 79.99
Brewmaster Immersion Wort Chillers Water Efficient Immersion Wort Chiller (25' x 3/8" With Tubing)

Some other key differences of BrewMaster's wort chillers. We solder the copper tubes together at the top of the chiller, out of wort, so that the who unit retains its shape. Other chillers use hose clamps which is a less permanent, but much cheaper, solution. The connection feeds on our chillers our bent out down at an angle so that if there is any dripping at the copper/vinyl connection point it drips out of the kettle and not back into your beer. Also works perfect with a kettle that features a notched lid. Made in the USA.

SPECS

  • 25 feet of 3/8 inch copper tubing
  • 8 feet of vinyl tubing at both the in and the out
  • Female garden hose fitting is included for easy adaptation to a garden hose.
  • 10" diameter, 8" to the top coil, 15" to the bend to go over the lip of the kettle.

Are Copper Wort Chillers safe to put in boiling wort?

Yes! Did you know there is zinc in copper? Zinc is an essential nutrient source for yeast to consume as they grow and multiply. The heat helps extract small amount of zinc found in copper. It's a win/win for your fermentation and for you as a brewer.

 

Prevent burns from Wort Chillers!

Connect your "In" and "Out" hoses to your Wort Chiller BEFORE adding the Wort Chiller to your boiling wort. If you place a previously used Wort Chiller into a boiling kettle the water trapped in the copper from the last use will turn to steam and possibly spit out of the chiller. It is also very difficult and dangerous to connect hoses to an already hot wort chiller.

Using Star San to condition your stainless and copper

Stainless steel discolored? Copper looking used, and starting to lose its shine? Take a little raw Star San (not mixed with any water) and apply it to the copper or stainless with a scrub pad (CE27) or a rag, and let it sit for 15 minutes. Rinse it off, and re-apply if necessary (although it usually isn't!) This will help keep your stainless conditioned, and will make your copper look brand new again.

$ 79.99
$ 79.99
Some other key differences of BrewMaster's wort chillers. We solder the copper tubes together at the top of the chiller,…

McAfee Secure

CRAFTR Guarantee

Easy Returns

Free Shipping On Orders Over $49

Tags
SKU WC20A
Type Immersion Wort Chillers
Description

Some other key differences of BrewMaster's wort chillers. We solder the copper tubes together at the top of the chiller, out of wort, so that the who unit retains its shape. Other chillers use hose clamps which is a less permanent, but much cheaper, solution. The connection feeds on our chillers our bent out down at an angle so that if there is any dripping at the copper/vinyl connection point it drips out of the kettle and not back into your beer. Also works perfect with a kettle that features a notched lid. Made in the USA.

SPECS

  • 25 feet of 3/8 inch copper tubing
  • 8 feet of vinyl tubing at both the in and the out
  • Female garden hose fitting is included for easy adaptation to a garden hose.
  • 10" diameter, 8" to the top coil, 15" to the bend to go over the lip of the kettle.
FAQ

Are Copper Wort Chillers safe to put in boiling wort?

Yes! Did you know there is zinc in copper? Zinc is an essential nutrient source for yeast to consume as they grow and multiply. The heat helps extract small amount of zinc found in copper. It's a win/win for your fermentation and for you as a brewer.

 

Tips

Prevent burns from Wort Chillers!

Connect your "In" and "Out" hoses to your Wort Chiller BEFORE adding the Wort Chiller to your boiling wort. If you place a previously used Wort Chiller into a boiling kettle the water trapped in the copper from the last use will turn to steam and possibly spit out of the chiller. It is also very difficult and dangerous to connect hoses to an already hot wort chiller.

Using Star San to condition your stainless and copper

Stainless steel discolored? Copper looking used, and starting to lose its shine? Take a little raw Star San (not mixed with any water) and apply it to the copper or stainless with a scrub pad (CE27) or a rag, and let it sit for 15 minutes. Rinse it off, and re-apply if necessary (although it usually isn't!) This will help keep your stainless conditioned, and will make your copper look brand new again.

Returns
Shipping

Customers Also Viewed

McAfee Secure

CRAFTR Guarantee

Easy Returns

Free Shipping On Orders Over $49

QUESTIONS & ANSWERS

Have a Question?

Be the first to ask a question about this.

Ask a Question