page contents Shirron Plate Wort Chiller – CRAFTR
Browse

Shirron Plate Wort Chiller

$ 94.32
Brewmaster Immersion Wort Chillers Shirron Plate Wort Chiller
Shirron Plate Wort Chiller

Made with 11 stainless steel plates that have been fused together with copper solder, these chillers have small channels weaving their way up and down each plate. This creates more surface area for the wort to travel over, and more time for the water to cool the wort down.

Cleaning a plate chiller is a larger task  than a normal immersion chiller, due to the tiny pockets created by the channels in the plates. These pockets can harbor cold break material, hop remains, or any other solid, and if not removed can cause infection in subsequent batches. The best way to clean is to recirculate a solution of hot water and PBW through the chiller as normal, then backflush the chiller, bringing the PBW through the "Wort Out" side in out through the "Wort In" side. This should remove any particulate that may have gotten trapped by the folds in the plates.

12.5" long, 3" wide, and 2" thick. The wort inlet and outlet is 1/2 Inch Male Pipe Thread, and the water in and out is 3/4 Inch Male Garden Hose Thread.

$ 99.99 -6%
$ 94.32
$ 99.99 -6%
$ 94.32
Shirron Plate Wort Chiller Made with 11 stainless steel plates that have been fused together with copper solder, these chillers…

McAfee Secure

CRAFTR Guarantee

Easy Returns

Free Shipping On Orders Over $39

Tags
SKU WC100
Type Immersion Wort Chillers
Description
Shirron Plate Wort Chiller

Made with 11 stainless steel plates that have been fused together with copper solder, these chillers have small channels weaving their way up and down each plate. This creates more surface area for the wort to travel over, and more time for the water to cool the wort down.

Cleaning a plate chiller is a larger task  than a normal immersion chiller, due to the tiny pockets created by the channels in the plates. These pockets can harbor cold break material, hop remains, or any other solid, and if not removed can cause infection in subsequent batches. The best way to clean is to recirculate a solution of hot water and PBW through the chiller as normal, then backflush the chiller, bringing the PBW through the "Wort Out" side in out through the "Wort In" side. This should remove any particulate that may have gotten trapped by the folds in the plates.

12.5" long, 3" wide, and 2" thick. The wort inlet and outlet is 1/2 Inch Male Pipe Thread, and the water in and out is 3/4 Inch Male Garden Hose Thread.

Returns
Shipping

McAfee Secure

CRAFTR Guarantee

Easy Returns

Free Shipping On Orders Over $39

QUESTIONS & ANSWERS

Have a Question?

Be the first to ask a question about this.

Ask a Question