page contents Perlick Beer Faucet 650SS With Flow Control – CRAFTR
Browse

Perlick Beer Faucet 650SS With Flow Control

$ 55.79
Brewmaster Draft Beer Faucets Perlick Beer Faucet 650SS With Flow Control

Perlick Beer Faucet 650SS With Flow Control

The famous forward-sealing Perlick beer faucet, with the added feature of an integrated Flow Control valve!

Manage foaming issues when dispensing beer at home with this Perlick 650SS Beer Faucet with Flow Control. The new flow control feature makes it easy to reduce foaming no matter the type of beer line you’re using; leaving you with a nice, tall glass of crystal clear beer.

Constructed of 304 stainless steel to last a lifetime.

The #1 feature of the Perlick faucet is its forward sealing design. Why is that so important? An ordinary, rear-sealing faucet closes by pushing a shuttle against the faucet shank, at the rear of the faucet. So once the tap is closed the faucet is still full of beer that has to be drained out. There is actually a pin hole in the back of an ordinary faucet that allows beer to drain. Because of this design, leftover beer residue inside the faucet makes operation sticky and can harbor bacteria which harm your beer’s flavor as it flows through the faucet. In the Perlick faucet, with its Forward Sealing design, beer only has to drain from the short 1" nozzle section. This allows it to always operate smoothly (even when it was not cleaned between uses) and greatly reduces contamination!.

 

Removing your beer faucet

Use a facuet wrench, D1265, to remove a facuet from a shank or towers. The faucet wrench is specially made to grip onto the faucet collar without scratching or damaging it. In a pinch you can use channel lock pliers and a cloth to grip the faucet collar.

Faucet placement in a draft system - a caution

Okay so this may be common sense but we've seen it happen a few times. When deciding where to put your faucet make note that you may choose to get a larger, taller faucet handle in the future. Place your faucet in a location where it won't get hit, by a freezer door, by a cabinet door, or whatever else is around.  

If your draft faucet is stuck, first disconnect the keg from the beer line. Then remove the faucet from the shank or tower. Mix a small solution of PBW or BLC and hot water (approximately 140F), and let the faucet soak in for 30 minutes. Wearing rubber dish gloves remove the faucet and try moving the handle again. If it does not move yet, disassemble the faucet as much as you can and place it back in the PBW solution for another 30 minutes. If you don't have PBW (powdered brewery wash) or BLC (Beer Line Cleaner) try just using hot water.

$ 59.99 -7%
$ 55.79
$ 59.99 -7%
$ 55.79
Perlick Beer Faucet 650SS With Flow Control The famous forward-sealing Perlick beer faucet, with the added feature of an integrated…

McAfee Secure

CRAFTR Guarantee

Easy Returns

Free Shipping On Orders Over $49

Tags
SKU D1221
Type Draft Beer Faucets
Description

Perlick Beer Faucet 650SS With Flow Control

The famous forward-sealing Perlick beer faucet, with the added feature of an integrated Flow Control valve!

Manage foaming issues when dispensing beer at home with this Perlick 650SS Beer Faucet with Flow Control. The new flow control feature makes it easy to reduce foaming no matter the type of beer line you’re using; leaving you with a nice, tall glass of crystal clear beer.

Constructed of 304 stainless steel to last a lifetime.

The #1 feature of the Perlick faucet is its forward sealing design. Why is that so important? An ordinary, rear-sealing faucet closes by pushing a shuttle against the faucet shank, at the rear of the faucet. So once the tap is closed the faucet is still full of beer that has to be drained out. There is actually a pin hole in the back of an ordinary faucet that allows beer to drain. Because of this design, leftover beer residue inside the faucet makes operation sticky and can harbor bacteria which harm your beer’s flavor as it flows through the faucet. In the Perlick faucet, with its Forward Sealing design, beer only has to drain from the short 1" nozzle section. This allows it to always operate smoothly (even when it was not cleaned between uses) and greatly reduces contamination!.

 

Product Documents

Perlick Cleaning / Data Sheet

Perlick Forward Sealing Faucet Instructions

 

Tips

Removing your beer faucet

Use a facuet wrench, D1265, to remove a facuet from a shank or towers. The faucet wrench is specially made to grip onto the faucet collar without scratching or damaging it. In a pinch you can use channel lock pliers and a cloth to grip the faucet collar.

Faucet placement in a draft system - a caution

Okay so this may be common sense but we've seen it happen a few times. When deciding where to put your faucet make note that you may choose to get a larger, taller faucet handle in the future. Place your faucet in a location where it won't get hit, by a freezer door, by a cabinet door, or whatever else is around.  

If your draft faucet is stuck, first disconnect the keg from the beer line. Then remove the faucet from the shank or tower. Mix a small solution of PBW or BLC and hot water (approximately 140F), and let the faucet soak in for 30 minutes. Wearing rubber dish gloves remove the faucet and try moving the handle again. If it does not move yet, disassemble the faucet as much as you can and place it back in the PBW solution for another 30 minutes. If you don't have PBW (powdered brewery wash) or BLC (Beer Line Cleaner) try just using hot water.

Returns
Shipping

McAfee Secure

CRAFTR Guarantee

Easy Returns

Free Shipping On Orders Over $49

QUESTIONS & ANSWERS

Have a Question?

Be the first to ask a question about this.

Ask a Question