page contents
Draft Beer Tower - 3 Faucet – CRAFTR
Browse

Draft Beer Tower - 3 Faucet

$ 167.39
Brewmaster Draft Beer Towers Draft Beer Tower - 3 Faucet
Draft Beer Tower - 3 Faucet

If you’ve been looking for a stylish way to serve your homebrew, you will love this single faucet tower for the fit, finish, and value

Includes 4' of 3/16" ID beer line and tail piece/hex nut per faucet for connection to commercial sanke style keg. If you are a homebrewer using Cornelius style kegs you can cut off the Sanke fittings and attach the appropriate fittings for your kegs.

Specifications:
  • 3" Diameter
  • 9 1/4" faucet height
  • 12" overall height
  • Three faucets

Please note: Towers do not come with the wooden faucet handles shown in the product photo.

If your draft faucet is stuck, first disconnect the keg from the beer line. Then remove the faucet from the shank or tower. Mix a small solution of PBW or BLC and hot water (approximately 140F), and let the faucet soak in for 30 minutes. Wearing rubber dish gloves remove the faucet and try moving the handle again. If it does not move yet, disassemble the faucet as much as you can and place it back in the PBW solution for another 30 minutes. If you don't have PBW (powdered brewery wash) or BLC (Beer Line Cleaner) try just using hot water.

$ 179.99 -7%
$ 167.39
$ 179.99 -7%
$ 167.39
Draft Beer Tower - 3 Faucet If you’ve been looking for a stylish way to serve your homebrew, you will…

McAfee Secure

CRAFTR Guarantee

Easy Returns

Free Shipping On Orders Over $39

Tags
SKU D1351
Type Draft Beer Towers
Description
Draft Beer Tower - 3 Faucet

If you’ve been looking for a stylish way to serve your homebrew, you will love this single faucet tower for the fit, finish, and value

Includes 4' of 3/16" ID beer line and tail piece/hex nut per faucet for connection to commercial sanke style keg. If you are a homebrewer using Cornelius style kegs you can cut off the Sanke fittings and attach the appropriate fittings for your kegs.

Specifications:
  • 3" Diameter
  • 9 1/4" faucet height
  • 12" overall height
  • Three faucets

Please note: Towers do not come with the wooden faucet handles shown in the product photo.

FAQ

If your draft faucet is stuck, first disconnect the keg from the beer line. Then remove the faucet from the shank or tower. Mix a small solution of PBW or BLC and hot water (approximately 140F), and let the faucet soak in for 30 minutes. Wearing rubber dish gloves remove the faucet and try moving the handle again. If it does not move yet, disassemble the faucet as much as you can and place it back in the PBW solution for another 30 minutes. If you don't have PBW (powdered brewery wash) or BLC (Beer Line Cleaner) try just using hot water.

Returns
Shipping

McAfee Secure

CRAFTR Guarantee

Easy Returns

Free Shipping On Orders Over $39

Questions & Answers

Have a Question?

Be the first to ask a question about this.

Ask a Question