page contents Draft Beer Tower - 2 Faucets – CRAFTR
Browse

Draft Beer Tower - 2 Faucets

$ 125.99
Brewmaster Draft Beer Towers Draft Beer Tower - 2 Faucets

If you’ve been looking for a stylish way to serve your homebrew, you will love this single faucet tower for the fit, finish, and value

Includes 4' of 3/16" ID beer line and tail piece/hex nut per faucet for connection to commercial sanke style keg. If you are a homebrewer using Cornelius style kegs you can cut off the Sanke fittings and attach the appropriate fittings for your kegs.

Please note: Towers do not come with the wooden faucet handles shown in the product photo.

  • 3" Diameter
  • 9 1/4" faucet height
  • 12" overall height
  • Two faucets

If your draft faucet is stuck, first disconnect the keg from the beer line. Then remove the faucet from the shank or tower. Mix a small solution of PBW or BLC and hot water (approximately 140F), and let the faucet soak in for 30 minutes. Wearing rubber dish gloves remove the faucet and try moving the handle again. If it does not move yet, disassemble the faucet as much as you can and place it back in the PBW solution for another 30 minutes. If you don't have PBW (powdered brewery wash) or BLC (Beer Line Cleaner) try just using hot water.

$ 139.99 -10%
$ 125.99
$ 139.99 -10%
$ 125.99
If you’ve been looking for a stylish way to serve your homebrew, you will love this single faucet tower for…

McAfee Secure

CRAFTR Guarantee

Easy Returns

Free Shipping On Orders Over $39

Tags
SKU D1340
Type Draft Beer Towers
Description

If you’ve been looking for a stylish way to serve your homebrew, you will love this single faucet tower for the fit, finish, and value

Includes 4' of 3/16" ID beer line and tail piece/hex nut per faucet for connection to commercial sanke style keg. If you are a homebrewer using Cornelius style kegs you can cut off the Sanke fittings and attach the appropriate fittings for your kegs.

Please note: Towers do not come with the wooden faucet handles shown in the product photo.

Specs
  • 3" Diameter
  • 9 1/4" faucet height
  • 12" overall height
  • Two faucets
FAQ

If your draft faucet is stuck, first disconnect the keg from the beer line. Then remove the faucet from the shank or tower. Mix a small solution of PBW or BLC and hot water (approximately 140F), and let the faucet soak in for 30 minutes. Wearing rubber dish gloves remove the faucet and try moving the handle again. If it does not move yet, disassemble the faucet as much as you can and place it back in the PBW solution for another 30 minutes. If you don't have PBW (powdered brewery wash) or BLC (Beer Line Cleaner) try just using hot water.

Returns
Shipping

McAfee Secure

CRAFTR Guarantee

Easy Returns

Free Shipping On Orders Over $39

QUESTIONS & ANSWERS

Have a Question?

Be the first to ask a question about this.

Ask a Question