page contents Chugger Pump with High Temperature Stainless Steel Head – CRAFTR
Browse

Chugger Pump with High Temperature Stainless Steel Head

$ 159.99
Brewmaster Pumps Chugger Pump with High Temperature Stainless Steel Head
The Chugger lineup of pumps represents a great value for an even better price. These pumps are workhorses in the brewery. Featuring a robust flow rate of 7 gpm, and a magnetic drive designed to handle back-pressure, these pumps are a great addition to any brewing setup! The Stainless Steel Chugger showcases their molded Stainless Steel Pump Head. This stainless pump is a steal for the price, and we've been more than happy with the quality! Use this to ease transfers between kettles, cool wort via a counterflow chiller, or recirculate icewater for quicker chilling!

The Chugger pump has 1/2" mpt inlet and outlet, allowing easy configuration for any application! We recommend setting these pumps up with a Ball valve on the outflow side, this way you can throttle down the outgoing flow rate, allowing for more efficient sparges or cooling! The pump head can also be rotated 360° (in 90° intervals) allowing for even more customization!
  • Stainless Steel Pump Head.
  • Food Grade up to 250° F.
  • 1/2" mpt inlet and outlet.
  • High Flow rate of 7 gpm
  • Max Head 18.9 ft
  • 115v 55" cord and plug attached.
  • 50/60 Hz, 1.4 amp
  • 1/20 HP, 3500 RPM
  • No more issues with crossthreading plastic heads or snapping off fittings.

Datasheet

CHUGGER PUMP® CPSS-IN-1 (115v) is warranted only against defects in workmanship for a period of 6 months from the date of purchase. DO NOT RUN THE PUMP DRY, it will not be covered under warranty.

The CHUGGER PUMP® CPSS-IN-1 (115v) is shipped ready for installation. Directional arrows on the pump head show fluid direction through the pump. The four screws on the pump head may be removed and the pump head can be rotated as required to fit your piping system.

The pumps are the same except for the obvious SS and Plastic materials. As a brewer, we believe the SS Head has 4 main advantages:

  • It will not break easily.
  • It will not cross thread.
  • It is FDA regulated.
  • It is easier to clean and sanitize

Ryton/Teflon (Impeller), Teflon (Thrust Washers), Stainless Steel (Front & Rear Casing).

DO NOT RUN THE PUMP DRY!

  • The Chugger Pump is not self-priming. It needs to be mounted below the source of liquid and the pump head needs to be flooded prior to turning the pump on.
  • You can rotate the pump head 90 Degrees. With the outlet pointing to 12:00, 3:00, 6:00 and 9:00.
  • You can mount the pump horizontally, vertically and upside down. However, if you mount the pump vertically do not have the motor facing up.
  • Do not mount the pump in an enclosed space. This will prevent proper ventilation and may cause the pump to overheat.

$ 159.99
$ 159.99
The Chugger lineup of pumps represents a great value for an even better price. These pumps are workhorses in the…

McAfee Secure

CRAFTR Guarantee

Easy Returns

Free Shipping On Orders Over $49

Tags
SKU H332
Type Pumps
Description
The Chugger lineup of pumps represents a great value for an even better price. These pumps are workhorses in the brewery. Featuring a robust flow rate of 7 gpm, and a magnetic drive designed to handle back-pressure, these pumps are a great addition to any brewing setup! The Stainless Steel Chugger showcases their molded Stainless Steel Pump Head. This stainless pump is a steal for the price, and we've been more than happy with the quality! Use this to ease transfers between kettles, cool wort via a counterflow chiller, or recirculate icewater for quicker chilling!

The Chugger pump has 1/2" mpt inlet and outlet, allowing easy configuration for any application! We recommend setting these pumps up with a Ball valve on the outflow side, this way you can throttle down the outgoing flow rate, allowing for more efficient sparges or cooling! The pump head can also be rotated 360° (in 90° intervals) allowing for even more customization!
Videos
Specs
  • Stainless Steel Pump Head.
  • Food Grade up to 250° F.
  • 1/2" mpt inlet and outlet.
  • High Flow rate of 7 gpm
  • Max Head 18.9 ft
  • 115v 55" cord and plug attached.
  • 50/60 Hz, 1.4 amp
  • 1/20 HP, 3500 RPM
  • No more issues with crossthreading plastic heads or snapping off fittings.

Datasheet

Warranty

CHUGGER PUMP® CPSS-IN-1 (115v) is warranted only against defects in workmanship for a period of 6 months from the date of purchase. DO NOT RUN THE PUMP DRY, it will not be covered under warranty.

The CHUGGER PUMP® CPSS-IN-1 (115v) is shipped ready for installation. Directional arrows on the pump head show fluid direction through the pump. The four screws on the pump head may be removed and the pump head can be rotated as required to fit your piping system.

FAQ

The pumps are the same except for the obvious SS and Plastic materials. As a brewer, we believe the SS Head has 4 main advantages:

  • It will not break easily.
  • It will not cross thread.
  • It is FDA regulated.
  • It is easier to clean and sanitize

Ryton/Teflon (Impeller), Teflon (Thrust Washers), Stainless Steel (Front & Rear Casing).

DO NOT RUN THE PUMP DRY!

  • The Chugger Pump is not self-priming. It needs to be mounted below the source of liquid and the pump head needs to be flooded prior to turning the pump on.
  • You can rotate the pump head 90 Degrees. With the outlet pointing to 12:00, 3:00, 6:00 and 9:00.
  • You can mount the pump horizontally, vertically and upside down. However, if you mount the pump vertically do not have the motor facing up.
  • Do not mount the pump in an enclosed space. This will prevent proper ventilation and may cause the pump to overheat.
Returns
Shipping

McAfee Secure

CRAFTR Guarantee

Easy Returns

Free Shipping On Orders Over $49

QUESTIONS & ANSWERS

Have a Question?

Be the first to ask a question about this.

Ask a Question